Pro Power Ski Shop Services Menu

Crankshaft Rebuilding




Rebuild Crankshaft/Kaw 650 (New Components)                     $360.00



Rebuild Crankshaft/Sea Doo 580 (New Components)                 $425.00



Rebuild Crankshaft/Sea Doo 650                                  $425.00



Rebuild Crankshaft/Yam 650/701 (New Components)                 $485.00



Rebuild Other Cranks, Not Listed (By Quote)



Rebuild/Phase/Pin Centers - Labor Only (2 cyl.)                 $140.00



Rebuild/Phase/Pin Centers - Labor Only (3 cyl.)                 $200.00

Crankshaft Services




Disassemble, Pin Center, Reassemble & True Kaw 550              $140.00



Pro-Flo Kaw 650 Crankshaft & Rods & Lighten Stage II            $350.00



Pro-Flow & Lighten Kaw 650 Crank Whls.(Disassembled)            $150.00



Profile, Lighten & Balance Kaw 650 Rods (Ea)                    $ 65.00



True 2 cyl. Crank to Factory Specs                              $ 25.00



True 3 cyl. Crank to Factory Specs                              $ 33.00



True/Weld & Re-True Crankshaft (2 cyl.)                         $ 50.00

Crankshaft Stroking
Stroke & Pin 2 cyl. Crank w/Press Pins $550.00 Stroke & Pin 2 cyl. Crank w/Integeral Pins $650.00 Stroke & Pin 3 cyl. Crank w/Press Pins $850.00 Stroke & Pin 3 cyl. Crank w/Integeral Pins $950.00 Stroke Crank Wheels/Kaw & Yamaha 500-650-701 $425.00

Engine Rebuilding
Assemble 2 cyl. Engine/Labor Only $150.00 Assemble 3 cyl. Engine/Labor Only $225.00 Top End Rebuild/Kaw 440/550 (Parts Incl.) $575.00 Top End Rebuild/Kaw 650/750 (Parts Incl.) $575.00 Top End Rebuild/Sea Doo 580/650 (Parts Incl.) $649.00 Top End Rebuild/Yam 650/701 (Parts Incl.) $575.00

Porting
CNC Crankcase Mod/Kaw 900/1100 ZXi $100.00 CNC Cylinder Mod/Kaw 900/1100 ZXi $ 75.00 Port & Match Exhaust Manifold (2 cyl.) $ 75.00 Port & Match Exhaust Manifold (3 cyl.) $125.00 Port & Match Intake Manifold (2 cyl.) $ 65.00 Port & Match Intake Manifold (3 cyl.) $ 95.00 Port Cases (2 cyl.) $150.00 Port Cases (3 cyl.) $225.00 Stage I Porting-Exhaust Port & Clean-up (2 cyl.) $150.00 Stage I Porting-Exhaust Port & Clean-up (3 cyl.) $225.00 Stage II Porting-Exhaust & Transfer Ports (2 cyl.) $325.00 Stage II Porting-Exhaust & Transfer Ports (3 cyl.) $490.00 Stage III Porting-Pro Mod Race (2 cyl.) $450.00 Stage III Porting-Pro Mod Race (3 cyl.) $675.00 Tunnel Port, Degree/cut Rotary, 580/650 $375.00

Shop Service-General
Big Bore/Hone/Champher Cylinder 4 & up Oversizes $ 47.00 Bore/Hone/Champher Cylinder 1 to 3 Oversizes $ 42.00 Custom Cut Pistons (Ea) $ 35.00 Heli-Coil & Clean Hole $ 20.00 Heli-Coil & Remove Stud (Ea) $ 40.00 Machine Engine Surface (Head/Cyl/Cases) $ 45.00 O'Ring Yam 650/701 Head for LTD $ 65.00 Pump Nozzle Boring $ 45.00 Resleeve Cylinder & Finish Bore & Hone/Labor Only $100.00 Straight Shop Time/Hourly Rate $ 50.00

Shop Service-Special
Flywheel Lightening $ 75.00 Machine Kaw 440 Cases for 550 Cyl & Pistons $ 60.00 Machine Kaw 750 Cases to Accept 650 Stator $ 65.00 Remove Rev Limiter, Yam 650/701 $ 75.00

Short Block "Pro Race" Packages
Kaw 1100 to 1190CC Stroker, ADA Billet Head $3295.00 Kaw 1100 to 1200CC Stroker, ADA Billet Cylinder $5100.00 Kaw 750 to 785CC Stroker, ADA Billet Head $2350.00 Kaw 900 to 1060CC Stroker, ADA Billet Head $3295.00 Sea Doo Slant 80x77MM Stroker, ADA Billet Head $2995.00 Sea Doo 1015CC Slant 91x78MM, ADA Billet Cylinder $4495.00 Sea Doo 720 to 785 7MM Stroker, ADA Billet Head $2795.00 Yam 1053 to 1200CC Stroker, ADA Billet Cylinder $5100.00 Yam 1053 to 1200CC Stroker, ADA Billet Head $3295.00 Yam 701 to 785CC Stroker, ADA Billet Cylinder $3795.00 Yam 701 to 785CC Stroker, ADA Billet Head $2350.00
Short block prices are based on cores supplied by customer,
add for any needed cores or damaged components.

All "Pro Race" Short Block packages include an ADA Billet
Head with Interchangeable Domes.

Prices Subject to Change

>